This year I made a decision, a decision not be to scared by fabric. For a couple of years now I’ve had some gold satin I brought back from Vegas in my stash and I’ve been so scared to use it having never worked with anything like that. This year it’s my tenth (?!) wedding anniversary and I thought it would make the loveliest dress for our celebratory meal out.
I picked McCalls 6569 for the pattern; a gorgeous sixties evening dress.
The first thing I did was post in the We Sew Retro Sew & Tell facebook group to ask for tips, it’s one thing I LOVE about the sewing community, you have a wealth of experience and advice online in a group like that and people are only willing to help and wish you luck. So armed with my new found advice I bit the bullet and cracked on. As you may have noticed if you read my blog, I don’t often make muslins of my clothes but as I was working with an unforgiving fabric I thought I probably should get it right the first time, as a seam ripper might not be the best friend it previously had been to me. I measured up, perfect in the bust but 2 inches bigger on the waist and 4 on the hips (not live I’ve had a baby in the last year or anything….). It was going to need a little adjustment.
To read more about the adjustment process and how I sewed my muslin up pop over to my blog.
So on to the dress….
I spent a whole night cutting out and marking up the pattern pieces (including the adjusted pieces – see my other blog). My, my, what a pain in the arse. It turns out satin is the most slippery material known to man (slight exaggeration, but it did feel like that at the time).
The following day I sewed the bodice together which went very well but then it was time for the lining. I should say at this point I have never lined anything in my life but as I was sewing with satin I thought it would probably be a good idea just to bit the bullet and do it.
I then spent a long night sewing the lining to the skirt pieces following this, and here was where I made one of my major mistakes. I have no idea how I marked the fabric up wrong but somehow I managed to.
When it came to the later stage of sewing it together it meant that I had a row of stitching down the back of the skirt next to the centre seam which I then had to unpick.
With a day to go to my anniversary (and after a lengthy trip to the dentist for two fillings) I spent a full day sewing the skirt pieces together. I attached the skirt to the bodice with relative ease and inserted the zip. Mistake number two: I was silly enough to not check that the fabric was taught when I basted the zip in, meaning that when I went to sew it I, again, had a big chuck of stitches to unpick which left a rather messy side zip insertion.
Thankfully it’s a side zip so really no one’s going to see it unless the come up really close to have a look . I finished sewing the lining pieces together at the waist and was quite impressed with how it looked inside out.
At this point I thought I should just leave the hemming to my anniversary and cut my losses before I cried.
So the day of my 10th wedding anniversary (last Friday) I sewed right up to the last minute but I did finally finish my dress with a couple of hours to spare, and I did get all dressed up and we did go out for the first time on our own in seven months. And here I am in my dress!
Overall I am extremely happy with how it turned out. What do you think?
To see more photos of my mistakes and successes and to read more about it, please have a look at my blog 🙂